Steel Mill Wire Rod Air Cooling Axial Flow Fan
No Information
GD30K2-12 Axial Flow Fan
Belt-driven axial fan for industrial duct ventilation, factory air exchange, process air conveying and equipment-room exhaust.
Designed for pipeline installation with the motor mounted above the casing. Selection is based on airflow, pressure, duct size, blade quantity, blade angle, medium condition and installation layout.
Pipeline Axial Fan for Industrial Air Conveying
The GD30K2-12 axial flow fan is designed to form part of an industrial ventilation pipeline. Air moves through the cylindrical casing along the fan axis, making the series suitable for relatively large airflow, compact straight-through installation and low to moderate system pressure.
The motor is mounted above the fan casing. Power is transmitted through a V-belt arrangement, while the bearing box is positioned inside a protective cylinder. This structure keeps the motor outside the main straight-through air passage under suitable working conditions.
Standard selection is intended for air below 60°C under matching conditions. Corrosive, flammable or harmful gas service requires separate confirmation of gas composition, material, sealing, motor arrangement and electrical safety requirements.
Suitable Conditions and Cases Requiring Special Review
Key Construction Features
| Item | Configuration | Selection Meaning |
|---|---|---|
| Fan Size | No.6, No.7, No.8, No.9 and No.10 | Match required airflow, duct diameter and installation space |
| Blade Quantity | 4 blades or 6 blades | Different configurations suit different airflow and pressure points |
| Blade Angle | 15°, 20°, 25° and 30° reference options | Blade angle affects airflow, pressure and motor power |
| Motor Position | Motor mounted above the fan casing | Keeps the motor outside the main air passage |
| Bearing Arrangement | Bearing box inside the protective cylinder | Supports shaft transmission inside the casing structure |
| Transmission | V-belt drive with adjustable motor base | Allows belt tension and center-distance adjustment |
GD30K2-12 Reference Performance Table
The following four-blade data is retained for preliminary selection. Final performance should be confirmed according to airflow, pressure, blade quantity, blade angle, speed, duct resistance and working medium.
| Model | Blade Qty. | Blade Angle | Speed r/min |
Pressure Pa |
Airflow m³/h |
Power kW |
Motor Model |
|---|---|---|---|---|---|---|---|
| 6 | 4 | 15–20° | 1450 | 167 | 7,200–9,500 | 1.1 | Y90S-4 |
| 6 | 4 | 25–30° | 1450 | 177–185 | 11,300–13,150 | 2.2 | Y100L1-4 |
| 6 | 4 | 15–35° | 960 | 74–81 | 4,800–8,700 | 0.75 | Y90S-6 |
| 7 | 4 | 15–20° | 1450 | 226 | 11,500–14,100 | 2.2 | Y100L1-4 |
| 7 | 4 | 25–30° | 1450 | 235–245 | 18,000–20,900 | 4 | Y112M-4 |
| 7 | 4 | 15–30° | 960 | 93–103 | 7,650–19,900 | 1.1 | Y90L-6 |
| 8 | 4 | 15–20° | 1450 | 294 | 17,300–22,000 | 5.5 | Y132S-4 |
| 8 | 4 | 25–30° | 1450 | 314–324 | 27,000–31,300 | 7.5 | Y132M-4 |
| 8 | 4 | 15–20° | 960 | 128 | 11,400–14,900 | 1.5 | Y100L-6 |
| 8 | 4 | 25–30° | 960 | 137–145 | 17,800–20,600 | 2.2 | Y112M-6 |
| 9 | 4 | 15–20° | 960 | 157 | 16,200–21,200 | 2.2 | Y112M-6 |
| 9 | 4 | 25–30° | 960 | 177–183 | 23,200–29,300 | 4 | Y132M1-6 |
| 10 | 4 | 15–20° | 960 | 206 | 22,600–29,700 | 4 | Y132M1-6 |
| 10 | 4 | 25–30° | 960 | 226–235 | 35,400–41,000 | 7.5 | Y160M-6 |
Information Needed Before Quotation
Required Airflow
Send required airflow and operating range.
Pressure or Duct Resistance
Send pressure or main duct resistance.
Duct Size
Confirm duct size and installation space.
Medium Condition
Confirm medium, temperature and special conditions.
Installation Method
Confirm mounting method and airflow direction.
Electrical Requirement
Send voltage, frequency and motor requirement.
Typical Industrial Applications
Duct Ventilation
Installed in ventilation ducts or pipelines.
Factory Air Exchange
For workshop air supply and exhaust.
Process Air Conveying
For process air conveying after review.
Paper Mill Ventilation
For paper-mill ventilation after condition review.
Chemical Plant Ventilation
For chemical ventilation after medium review.
Equipment-Room Cooling
For low-pressure cooling and exhaust.
GD30K2-12 Axial Flow Fan FAQ
What is the GD30K2-12 fan mainly used for?
It is mainly used for industrial duct ventilation, factory air exchange, process air conveying and equipment-room exhaust.
How is it different from a direct-drive axial fan?
The GD30K2-12 uses a belt-drive arrangement with the motor mounted above the casing, while a direct-drive axial fan mounts the impeller directly on the motor shaft.
Can it convey corrosive or flammable gas?
Only after separate review. Gas composition, material, sealing, motor arrangement and safety requirements must be confirmed before selection.
Are six-blade configurations available?
Yes. Four-blade and six-blade configurations are available, but the correct option should be confirmed from the required airflow and pressure point.
What information is needed for quotation?
Please provide airflow, pressure, duct size, medium, temperature, installation method, voltage, frequency, quantity and destination.
Send Your GD30K2-12 Duty Point
Send airflow, pressure, duct size, medium, temperature and installation requirements. QIYUE FAN will review the suitable model, blade configuration and motor.
Hot Tags: gd30k2-12 axial flow fan, China gd30k2-12 axial flow fan manufacturers, suppliers, factory
Send Your Operating Conditions
Airflow, pressure, gas medium, temperature, voltage and quantity.