Industrial Fan Manufacturing · Zibo, China
QIYUE FAN industrial fan manufacturer
Menu

QIYUE FAN / REPLACEMENT PROCUREMENT

Industrial Fan Bearing Replacement: Identify the Part Before Ordering

A casting mark on the bearing housing is not necessarily the designation of the bearing inside it. Start the enquiry by separating the bearing, housing and complete supported assembly.

Red centrifugal fan during assembly showing the external bearing housing, pulley and supporting base
QIYUE workshop assembly: external bearing housing, pulley and base before guard installation. The internal bearing designation is not visible in this photograph.

Which Item Is Being Replaced?

Bearing only

Record the complete bearing designation and manufacturer from the part or original bill of materials. Keep every prefix, suffix and separator when transcribing the marking.

Housing and associated parts

Identify the housing separately, including the required seals, covers, sleeves or locating components. List what is being retained and what the supplier must include.

Complete assembly

If the enquiry includes the shaft, bearing supports or drive components, attach the assembly drawing and identify the replacement boundary. A housing quotation and a complete assembly quotation are not directly comparable.

Keep the Complete Designation

SKF’s bearing-designation guidance distinguishes the basic designation, which identifies the bearing type, basic design and dimensions, from supplementary prefixes and suffixes that identify further design features or components. Its catalogue also explains that internal-clearance classes may be identified by suffixes. Copying only the main number can therefore lose information needed to review a replacement.

For a proposed alternative, ask the supplier to return both complete designations and explain the differences. Do not remove an unfamiliar suffix from the enquiry or assume that different manufacturers use every code in the same way.

Build the Identification Record Without Guessing

Use existing maintenance records, the fan serial number, parts drawings and clear photographs first. Ask trained maintenance personnel to record markings and dimensions when access is safely available. Do not open or measure operating machinery to complete a purchase request.

  • Equipment identity: fan tag, manufacturer, serial number and relevant assembly-drawing revision.
  • Part identity: full bearing and housing markings, photographs and the source of each recorded designation.
  • Replacement boundary: bearing only, housing parts or complete assembly; quantity per position and number of spare sets.
  • Service information: shaft speed, operating temperature records, lubrication instructions and relevant maintenance findings.

If the marking cannot be read, send the available evidence for identification. A measured bore or a similar-looking housing is a starting point, not an approved substitute specification.

Separate a Failed Part from a Changed Duty

Tell the supplier whether the fan is being restored to its original service or whether speed, loading, temperature or the drive has changed. Include the maintenance team’s findings when repeat failure, overheating or vibration prompted the order. The purchase request should support the investigation rather than assume that another bearing alone will resolve the cause.

Use the fan vibration investigation guide for the wider equipment review and the V-belt replacement guide when the drive is also within scope.

Agree the Supply and Handover

Request an itemized offer with the proposed manufacturer and complete part designation, included accessories, quantity, relevant drawings and applicable installation or lubrication documents. Have the responsible equipment specialist approve compatibility before ordering an alternative.

Retain the approved part references with the equipment tag so the next purchase starts from a verified record. Fit, clearance, lubricant and installation method must follow the selected equipment’s instructions and competent technical review.

Review the complete fan replacement scope · Send your equipment and part records

Reference: SKF Rolling Bearings catalogue, “Basic bearing designation system” and “Internal clearance.”