QIYUE FAN · PLASTICS RECYCLING
Plastic Granulator Dust Extraction: Define the Fan Package Before Requesting a Quote
Buying an extraction fan for a plastic granulator starts with identifying what the air stream must carry. A dust-capture connection, a granule-transfer line and a general workshop exhaust are different duties. Send the machine interface and the material information together, rather than specifying a fan from granulator motor power or production throughput alone.
Separate capture air from material transfer
Dust extraction connection
Identify the machine manufacturer’s extraction port or the designer’s capture arrangement. Record which dust-producing operations it serves and which machines run together. Ask for the required airflow and the pressure reference at that interface.
Granule or flake transfer
If the line intentionally transports recovered material, identify it as a conveying duty. Provide the material rate and conveying layout separately; do not substitute an extraction-air estimate for the conveying-system design.
For a combined arrangement, mark where solids are separated and which stream reaches the fan. Keep the actual system drawing in the enquiry. A fan described as suitable for light particles is not automatically suitable for every recycled plastic mixture.
Describe the feedstock, not just “plastic dust”
Use the plant’s material records and assessment to complete the following pack. Where a value is unavailable, identify the document or responsible party needed to supply it instead of guessing.
Material identity
- Polymer or material blend and whether it changes between batches.
- Available safety data and relevant dust-test information.
- Known fillers, fibres, contaminants or residual coatings.
Air-stream condition
- Dust or particle information at the proposed fan inlet.
- Normal and maximum temperature, with their operating cases.
- Separator or filter arrangement and the supplied pressure-loss basis.
WorkSafe’s granulator guidance identifies dust containment, suitable extraction and fire/explosion risks. For cellular-plastics crumbing, HSE also addresses enclosure, extraction and ignition protection. The applicable specialist assessment must define equipment requirements for the actual material and site; a general-purpose fan or a motor description alone does not establish suitability.
Make the machine and fan suppliers work to the same boundary
Prepare one marked-up drawing with the granulator, capture connections, collector, fan and discharge. Add the approved interface requirements and identify who owns each missing item. This avoids receiving a fan-only offer for a project that also needs a new collector or installation work.
- Machine interface: connection dimensions, permitted arrangement and machine-supplier requirements.
- System duty: required airflow, pressure definition, gas conditions and simultaneous operating cases.
- Collector interface: selected loading condition, loss data and items already included in that loss.
- Fan installation: available space, access, electrical supply, connection arrangement and control responsibility.
- Commercial scope: fan, motor, accessories, controls, installation and commissioning identified as included, optional or by others.
Replacement project? Send the change, not only the nameplate
Pair the current fan details with the reason for replacement. Has the granulator, feedstock, filter, duct route or number of connected machines changed? Attach the existing operating evidence and identify the revised requirement. Use the branch-extension review when adding a machine, and the filter-change record when collector performance has changed.
Agree the acceptance record before ordering
Request a written division of responsibilities between the machine supplier, extraction-system designer, fan supplier and installer. Ask who will verify the agreed duty at the defined interfaces and provide the final equipment and commissioning records. Record the operating material and machine combination used for acceptance so later comparisons are meaningful.
For the quotation itself, use the item-by-item scope comparison. For intentional solids transfer, review pneumatic-conveying fan procurement. Browse dust-collection fan families after the required duty and material conditions are established.
Planning a granulator extraction fan package?
Send the machine connection details, material description, system layout and available airflow/pressure requirements for a project-specific fan review.
SEND THE PROJECT REQUIREMENTS →Source notes: WorkSafe New Zealand: Plastics granulator fact sheet (2014 background guidance); HSE: Cellular plastics fire-risk guidance (shaping and crumbing sections). The procurement checklist is a practical coordination framework, not a machine modification instruction or a substitute for current local requirements.
